(888) 278-3888 . El Monte, CA 91731, USA

Home | Random Orbital Sanders | Buffers/Polishers Sander| Orbital Sanders | Accessories |
       
 
FAQ

How can I tell the major differences between the 3/32" and 3/16" sanders in all models?

There are 2 places you can check:

1. The throttle plate of the sander. If it is anodized (black color) then it is 3/32" (2.5MM) sander. If it is chromic (silver color) then it is 3/16" (5.0 MM) sander.

2. The shaft balancer under the sander marks the size of the orbit.

How do I check the size of back-up pad should be used?
The size of the pad is marked on the shaft balancer under the sander. Remove the pad from the sander, turn over the sander, you will see the balancer and the information.
What do I do when the sander makes unusual vibrations or noise?
  1. Check to see if you have the right size pad installed on your AirVANTAGE sander.
  2. Check to see if the back-up pad is wrong size, worn-out, over-used.
  3. Check the Tool Operation section for detail information.
Where do I send my AirVANTAGE Sander(s) for repair?

You need to send your sander(s) to the authorized AirVANTAGE Service Center for repair. The following is the list of the addresses:

Prime Supply Inc. 
Air VANTAGE Tools Services Center    
10018 Lower Azusa Road, # C
El Monte, CA 91731
USA
 
 

Return | Home